Abstract
PDF HTML阅读 XML下载 导出引用 引用提醒 电泵浦垂直外腔面发射激光器振荡特性的理论分析及实验研究 DOI: 作者: 作者单位: 中国科学院长春光学精密机械与物理研究所,中国科学院长春光学精密机械与物理研究所,中国科学院长春光学精密机械与物理研究所 发光学及应用国家重点实验室,中国科学院长春光学精密机械与物理研究所 发光学及应用国家重点实验室,中国科学院长春光学精密机械与物理研究所 发光学及应用国家重点实验室,中国科学院长春光学精密机械与物理研究所 发光学及应用国家重点实验室,中国科学院长春光学精密机械与物理研究所 发光学及应用国家重点实验室,中国科学院长春光学精密机械与物理研究所 发光学及应用国家重点实验室 作者简介: 通讯作者: 中图分类号: 基金项目: 国家自然科学基金(61204056,61234004,11074247,51172225), 吉林省科技发展项目(201105025,20116011) Oscillation characteristics of electrically-pumped vertical external cavity surface emitting lasers Author: Affiliation: Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,State Key Laboratory of Luminescence and Applications,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,State Key Laboratory of Luminescence and Applications,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,State Key Laboratory of Luminescence and Applications,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,State Key Laboratory of Luminescence and Applications,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,State Key Laboratory of Luminescence and Applications,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,State Key Laboratory of Luminescence and Applications,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences Fund Project: 摘要 | 图/表 | 访问统计 | 参考文献 | 相似文献 | 引证文献 | 资源附件 | 文章评论 摘要:对具有InGaAs/GaAsP量子阱周期增益结构有源区的980 nm电泵浦垂直外腔面发射激光器(EP-VECSEL)的振荡特性进行了理论分析及实验研究.模拟并分析了耦合腔条件下EP-VECSEL的振荡特性与其分布布拉格反射镜(DBR)及外腔镜反射率之间的关系,并根据理论分析结果对器件结构进行了优化设计.在实验上制备出具有不同外腔镜反射率的EP-VECSEL器件,并对其连续波(CW)振荡特性进行了研究.实验结果表明,有源区直径为300 μm的EP-VECSEL器件在外腔镜反射率为90 %时阈值电流为1.2 A,注入电流为4 A时连续激光输出功率为270 mW; 在外腔镜反射率为95%时阈值电流为0.9 A,4 A下输出激光功率为150 mW.实验结果与理论分析结论符合较好,说明本文采用的理论分析方法能有效模拟及优化EP-VECSEL器件的振荡特性. Abstract:The oscillation characteristics of 980 nm electrically-pumped vertical-external-cavity surface-emitting laser (EP-VECSEL) with periodic gain structure active region of InGaAs/GaAsP quantum well was analyzed theoretically and experimentally. The relationship between the DBR & external cavity mirror reflectivity and the oscillating characteristic characteristics of the EP-VECSEL with coupled cavity was simulated. Furthermore, based on the results of simulation, the device structure was optimized. EP-VECSEL devices with different external cavity reflectivity were fabricated and the continuous-wave (CW) oscillation output characteristics were studied. The results of experiment indicated that the threshold current of the 300 μm-device with 90% external mirror reflectivity was 1.2 A and its output power was 270 mW while under injected current of 4A; the output power of the 300 μm-device with 95% external mirror reflectivity was 150 mW at 4 A of injected current and the threshold current was 0.9 A. The experimental results were in good agreement with theoretical analysis, indicating that the model using in this article is suitable for the optimization of EP-VECSEL’s oscillation characteristics.The oscillation characteristics of 980 nm electrically-pumped vertical-external-cavity surface-emitting laser (EP-VECSEL) with periodic gain structure active region of InGaAs/GaAsP quantum well was analyzed theoretically and experimentally. The relationship between the DBR & external cavity mirror reflectivity and the oscillating characteristic characteristics of the EP-VECSEL with coupled cavity was simulated. Furthermore, based on the results of simulation, the device structure was optimized. EP-VECSEL devices with different external cavity reflectivity were fabricated and the continuous-wave (CW) oscillation output characteristics were studied. The results of experiment indicated that the threshold current of the 300 μm-device with 90% external mirror reflectivity was 1.2 A and its output power was 270 mW while under injected current of 4A; the output power of the 300 μm-device with 95% external mirror reflectivity was 150 mW at 4 A of injected current and the threshold current was 0.9 A. The experimental results were in good agreement with theoretical analysis, indicating that the model using in this article is suitable for the optimization of EP-VECSEL's oscillation characteristics. 参考文献 相似文献 引证文献
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have