Oscillating water column wave energy converter arrays coupled with a parabolic-wall energy concentrator in regular and irregular wave conditions

Abstract

Based upon previous research on a single, high-efficiency Oscillating Water Column (OWC) wave energy capture system (Mayon et al., 2021), this work further extends the numerical investigation to the layout design and performance of the wave energy convertor (WEC) array coupled with a parabolic, energy concentrating wall in both regular and irregular incident wave conditions. A heuristic method to identify the optimal siting of the component, cylindrical OWC WECs in the array, installed in the concave opening of the wall is presented. The most advantageous location of the chambers is found to lie on a parabolic curvature line which is inset from the wall. Two separate arrays composed of three and five component OWCs are investigated in a range of regular wave conditions. The hydrodynamic power and efficiency of each chamber in each of the arrays is determined, and subsequently the aggregated array performance is established. It is found that the primary OWC chamber in the array configuration can attain approximately the same hydrodynamic power output as a single, isolated OWC chamber located the parabolic wall focus, albeit with a narrower energy capture bandwidth. The secondary and tertiary component chambers in the arrays contribute a lesser, yet still considerable quantity of hydrodynamic power to the consolidated system. The cumulative hydrodynamic efficiency of the collective arrays is less than the hydrodynamic efficiency of a single OWC chamber at the wall focus, but more efficient than an isolated OWC chamber positioned in open-sea conditions. Moreover, the hydrodynamic efficiency of the arrays exhibits better stability across the range of incident wave periods investigated, denoting that the individual component chambers in the array are efficacious at different incident wave conditions. The five chamber array is comprehensively analysed in irregular incident wave conditions. The array system is demonstrated to maintain a high power output and efficient behaviour in irregular incident wave conditions-an effect attributable to the reflecting wall influence. In summary, the five-chamber array configuration yields a higher power output and improved stability in terms of efficiency performance when compared with the three-chamber array configuration in regular waves. The array maintains this exceptional performance in irregular incident wave conditions.