Abstract
Abstract The orthotropic viscoelastic creep (VEC) at a constant moisture content (MC) and mechano-sorptive creep (MSC) during the adsorption process were examined for Chinese fir (Cunninghamia lanceolata) under tension at 20, 40, 60 and 80% relative humidity (RH) (30°C). Free swelling was performed on matched specimens based on the strain partition assumption to better understand the characteristics of the mechano-sorptive (MS) phenomenon. Expansion, elastic and time-dependent creep behaviors of radial (R) and tangential (T) specimens were affected by the MC to a higher degree than those of the longitudinal (L) specimen. A higher proportion of elastic strain in total strain was found in the L specimen as compared with transverse specimens, regardless of VEC and MSC. The RH level had a greater effect on relaxation behavior in the L specimen for MSC. According to the three tests, expansion mainly dominated the creep strain during adsorption, especially for the L specimen. The MS strain exerted more influence on transverse specimens and had less contribution to the L specimen. Moreover, under all RH isohume (RHI) conditions, the unstable state contributed to MS strain diminishing as MC approached equilibrium moisture content (EMC). A shorter adsorption time to a new equilibrium state was achieved at the expense of intensifying the unstable state of the wood cell wall.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
