Origins for the size effect of surface roughness in diamond turning

Abstract

In this work, a novel surface roughness prediction model, in which the kinematics, plastic side flow, material spring back and random factors are considered, is theoretically formulated to reveal the underlying mechanisms for the observed size effect of surface roughness in diamond turning. In this newly developed model, the copy effect of tool edge waviness is successively integrated into the kinematic component, and a yield stress and minimum undeformed chip thickness related function is constructed for calculating the material spring back. For the component of plastic side flow, the effects of minimum undeformed chip thickness, tool nose radius, feed rate as well as cutting width are took into account. Moreover, the component of random factors is assumed to follow a Gaussian distribution. Theoretical predictions and experimental validations show that the feed rate dependent size effect of surface roughness as observed on the fine grain substrate is derived from the decrement of the kinematic component being less than the increment of the plastic side flow component. For the coarse grain substrate, the large and hard inclusion inevitably appears in the matrix. Therefore, the size effect of surface roughness can be attributed to the formation of pit defect and deep groove on the finished surface at large feed rate and the protrusion of hard inclusion from the finished surface at low feed rate.