Abstract
Highly oriented lead zirconate titanate (PZT) films were fabricated on a platinized silicon substrate using a combination of sol-gel and radio frequency (RF) magnetron sputtering deposition methods. A sol-gel derived PZT layer highly oriented to the (100) plane was deposited as a seed layer, and PZT with the same composition then was deposited on the seed layer by RF-magnetron sputtering. The film deposited on the seed layer showed a strong (100) preferred orientation, while the film deposited without the seed layer showed a (111) preferred orientation. Furthermore, a thick PZT film of up to 4 μm was able to be deposited without cracks by using the seed layer. The piezoelectric property of the (100) oriented film was much better than that of the (111) oriented film.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
