Abstract
Acrylic acid modified magnesium hydroxide nano-needles (AA–Mg(OH)2) had been synthesized by alkaline injected into magnesium chloride solution at about 0°C in the presence of acrylic acid (AA). Then the polystyrene/magnesium hydroxide nano-needles composite (PS/Mg(OH)2) had been prepared by the radical copolymerization with styrene in toluene system using AA–Mg(OH)2 as a macro-monomer. The elemental analysis (EA) and Fourier transform infrared (FTIR) analyses show that the polystyrene had been grafted onto the surfaces of the nano-needles (AA–Mg(OH)2). The nano-needles (AA–Mg(OH)2) had better dispersibility in polystyrene matrix as observed by transmission electron microscope (TEM) analysis. The thermal behavior analysis results from the differential scanning calorimetry (DSC) indicated that the magnesium hydroxide nano-needles had lower thermal decomposition temperature than that of the polymer matrix and it is expected that the nano-needles prepared by the proposed method could be used as an environmental-friendly flame retardant.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.