Abstract
Organic/inorganic stacks were deposited on flexible polycarbonate substrate using inductively coupled plasma chemical vapor deposition (ICP-PECVD) for permeation barrier application. The effects of deposition temperature, RF power, gas flow ratio, deposition pressure on film properties of surface roughness, water vapor transmission rate (WVRT) were investigated. Energy dispersive spectrum (EDS), atomic force microscopy (AFM) and transmission electron microscopy (TEM) were used to characterize the film characteristics of the stack layers. It was found that the surface roughness Ra was as low as is 0.25 nm. The WVRT values of the optimum barriers structures were 10-2g/m2 day (1 pair of stacks) and 4.8 x 10-5g/m2 day (4 pair of stacks). This result indicated that the permeation barrier films prepared by ICP-PECVD could be a promising candidate for flexible electronic applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
