Abstract

We investigate bulk heterojunction organic photodetectors with unbalanced charge carrier mobilities in the active layer. We present an experimental example of an organic photodiode with very unbalanced mobilities but achieving state-of-the-art parameters in terms of external quantum efficiency exceeding 75% (at illumination 638 nm), and of bandwidth exceeding 1 MHz. The active layer of the photodiode is a 50 nm thick bulk heterojunction made of a blend of PCBM and copolymer of 5,6-difluoro2,1,3-benzothiadiazole, with mobility of slower charge carriers of order of 5 × 10−7 , estimated using space-charge-limited photocurrent technique. To understand why such a low mobility does not have deteriorating effects on the photodetecting performance of the photodiode, we performed drift-diffusion simulations of bulk heterojunction photodiodes with Langevin recombination. According to the simulation, the bandwidth of the photodiode is approximately independent of the mobility of slower charge carriers in the blend, and the negative effect of low mobility on the responsivity can be compensated by increasing the reverse bias. Our study shows that well-performing organic photodetectors can be fabricated using organic semiconductors having too low mobility for photovoltaic applications.

Highlights

  • Organic electronics is a promising way to realize flexible, large-area light sensors [1, 2]

  • We investigate bulk heterojunction organic photodetectors with unbalanced charge carrier mobilities in the active layer

  • We present an experimental example of an organic photodiode with very unbalanced mobilities but achieving state-of-the-art parameters in terms of external quantum efficiency exceeding 75%, and of bandwidth exceeding 1 MHz

Read more

Summary

Introduction

Organic electronics is a promising way to realize flexible, large-area light sensors [1, 2]. A simple realization of the organic photodetector utilizes the organic bulk-heterojunction architecture, in which a blend of donor and acceptor organic semiconductors is used as the active layer Such a single layer structure is desirable for manufacturing from solution, preferably by printing [9, 10]. The influence of charge carrier mobilities and contact properties on the energy conversion efficiency of bulk heterojunction solar cells is a well studied topic [14,15,16,17]. Christ et al [21] considered the influence of faster mobility on nanosecond response of photodiodes illuminated by laser pulse. In this contribution, we investigate the achievable performance of bulk heterojunction photodetectors with unbalanced mobilities. The simulation allows us to systematically investigate the effect of charge carrier mobility imbalance on the most important steady-state and transient responses of photodetectors

Example photodiode
Findings
Device simulation
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call