Orange peel activated carbon produced from waste orange peels for adsorption of methyl red

Abstract

Abstract The existence of pollutants in the water is a very significant environmental problem that needs to be addressed. This work describes the development and testing of activated carbon made from orange peels, which is effective at removing methyl red (MR) from aqueous solutions, and thus provides a solution to this problem. Adsorbents made in the lab can be characterized by their bulk density, particle size, surface area, and proximate analysis. The surface area of the prepared adsorbent was 512.2 m2g−1. Standard procedures such as XRD, SEM, and FTIR analysis are also used to characterize prepared orange peel-activated carbon. Adsorbent dosage (0.25 to 1.25 g/L), MR concentration (100 to 400 mg/L), temperature (40 to 60 °C), contact time (10 to 60 minutes), and pH (3 to 11) were all examined in this experiment. At an amount of adsorbent of 1 g/L adsorbent, MR concentration of 100 mg/L, and a pH of 11, maximum adsorption has been observed. In order to analyze the results, adsorption models such as the Langmuir and Freundlich were applied. At 60 °C, the adsorption isotherm was found to fit the Langmuir model with 111.11 mg/g. The linear regression correlation coefficient, the R2 value is 0.999. Analytical results showed that MR could be effectively removed by using AC made from waste orange peels as an adsorbent.