Optimum vibration absorber (tuned mass damper) design for linear damped systems subjected to random loads

Abstract

Optimum design of dynamic vibration absorbers (DVAs) installed on linear damped systems that are subjected to random loads is studied and closed-form design formulas are provided. Three cases are considered in the optimization process: Minimizing the variance of the displacement, velocity and acceleration of the main mass. Exact optimum design parameters for the velocity case, which to the best knowledge of the author do not exist in the literature, are derived for the first time. Exact solutions are found to be directly applicable for practical use with no simplification needed. For displacement and acceleration cases, a solution for the optimum absorber frequency ratio is obtained as a function of optimum absorber damping ratio. Numerical simulations indicate that optimum absorber damping ratio is not significantly related to the structural damping, especially when the displacement variance is minimized. Therefore, optimum damping ratio derived for undamped systems is proposed for damped systems for the displacement case. When acceleration variance is minimized, however, the optimum damping ratio derived for undamped systems is found not as accurate for damped systems. Therefore, a more accurate approximate expression is derived. Numerical comparisons with published approximate expressions at the same level of complexity indicated that proposed design formula yield more accurate estimates. Another important finding of the paper is that for specific applications where all of the response parameters are desired to be minimized simultaneously, DVAs designed per velocity criteria provide the best overall performance with the least complexity in the design equations.