OPTIMUM OPERATING CONDITIONS IN DRYING FOODSTUFFS WITH SUPERHEATED STEAM

Abstract

ABSTRACT It is inferred from experimental data that in drying foodstuffs with superheated steam, the initial drying rate has a direct effect on the rate at which the overall drying takes place. That is, the faster the initial drying rate, the shorter the overall drying time. This criterion is very convenient because at the beginning, water moistens the sample external surface so evaporation does not depend on internal sample characteristics, but only on external convective heat and mass transfer rates. Mass and energy balance equations are solved and the result converted into a general initial drying rate equation, in which all dryer characteristics are grouped into one dimensionless parameter. The initial drying rate equation is mathematically maximized and the optimum working conditions determined. The result shows that initial drying rate always increase with increases of either the superheated steam temperature or velocity, but once these two variables are fixed, there exists at least one “optimum” pressure at which the initial drying rate is a maximum. Finally, the initial drying rate and optimum condition equations are applied to three model dryers, a dryer for a flat sheet, a fixed bed dryer and a rotary dryer. In each case, numeric values are computed and plotted as drying rate versus pressure curves, in which the optimum drying rate is also included. Also presented is a chart to compare the optimum pressures as functions of temperature and steam velocity for the three dryers.