Optimum Design of Profiled Root–Trimming Device for Pull–Cut Harvester of Leading–Drawing–Cutting Type

Abstract

Listen

Translate article

In this study, a leading–drawing–cutting–type profiled root–trimming device was designed to address the problems of high impurity and damage rates that occur with the operation of a pull–cut garlic harvester. The main components of the designed device include a pull–clamp mechanism, roll–pulling mechanism, root–trimming knife mechanism, lifter, gearbox, universal drive shaft, motor, and frame that, together, can complete the root–trimming operation for a pull–cut garlic harvester. An orthogonal regression test was carried out by taking the roller diameter, the roller inclination angle, the knife rotation speed, and the working speed as factors and by taking the impurity rate and the damage rate as indices. The results of the orthogonal regression test showed that the impurity rate was most strongly affected by the roller diameter, followed by the knife rotation speed, the working speed, and the roller inclination angle. Meanwhile, the damage rate was most strongly affected by the knife rotation speed, followed by the roller diameter, the working speed, and the roller inclination angle. The regression analysis showed that when the roller diameter was 100 mm, the roller inclination angle was 25°, the knife rotation speed was 200 r·min−1, and the working speed was 1.22 km·h−1, the comprehensive trimming quality reached its maximum value of 97.82%. The verification result of the parallel test gave a value of 97.52%, which was mainly affected by the irregular sizes of the bulbs, but it showed no significant difference from the regression analysis results. The tests verified that the profiled root–trimming device could be applied to develop the technology of garlic pull–cut harvesters.