Abstract
This paper present an investigation of the collapse load in cylinder shell under uniformexternal hydrostatic pressure with optimum design using finite element method viaANSYS software. Twenty cases are studied inclusive stiffeners in longitudinal and ringstiffeners. Buckling mode shape is evaluated. This paper studied the optimum designgenerated by ANSYS for thick cylinder with external hydrostatic pressure. The primarygoal of this paper was to identify the improvement in the design of cylindrical shell underhydrostatic pressure with and without Stiffeners (longitudinal and ring) with incorporativetechnique of an optimization into ANSYS software. The design elements in this researchwas: critical load, design variable (thickness of shell (TH), stiffener’s width (B) andstiffener’s height (HF). The results obtained illustrated that the objective is minimizedusing technique of numerical optimization in ANSYS with optimum shell thickness andstiffener’s sizes. In all cases the design variables (thickness of shell) was thicker than themonocoque due to a shell’s thicker is essential to achieve the strength constraints. It can beconcluded that cases (17,18,19, and 20) have more than 90% of un-stiffened critical load.The ring stiffeners causes increasing buckling load than un-stiffened and longitudinalstiffened cylinder.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
