Abstract

Abstract. The aim of this study is to show how a newly developed aerodynamic lens system (ALS), a delayed ion extraction (DIE), and better electric shielding improve the efficiency of the Aircraft-based Laser ABlation Aerosol MAss spectrometer (ALABAMA). These improvements are applicable to single-particle laser ablation mass spectrometers in general. To characterize the modifications, extensive size-resolved measurements with spherical polystyrene latex particles (PSL; 150–6000 nm) and cubic sodium chloride particles (NaCl; 400–1700 nm) were performed. Measurements at a fixed ALS position show an improved detectable particle size range of the new ALS compared to the previously used Liu-type ALS, especially for supermicron particles. At a lens pressure of 2.4 hPa, the new ALS achieves a PSL particle size range from 230 to 3240 nm with 50 % detection efficiency and between 350 and 2000 nm with 95 % detection efficiency. The particle beam divergence was determined by measuring the detection efficiency at variable ALS positions along the laser cross sections and found to be minimal for PSL at about 800 nm. Compared to measurements by single-particle mass spectrometry (SPMS) instruments using Liu-type ALSs, the minimum particle beam divergence is shifted towards larger particle sizes. However, there are no disadvantages compared to the Liu-type lenses for particle sizes down to 200 nm. Improvements achieved by using the DIE and an additional electric shielding could be evaluated by size-resolved measurements of the hit rate, which is the ratio of laser pulses yielding a detectable amount of ions to the total number of emitted laser pulses. In particular, the hit rate for multiply charged particles smaller than 500 nm is significantly improved by preventing an undesired deflection of these particles in the ion extraction field. Moreover, it was found that by using the DIE the ion yield of the ablation, ionization, and ion extraction process could be increased, resulting in up to 7 times higher signal intensities of the cation spectra. The enhanced ion yield results in a larger effective width of the ablation laser beam, which in turn leads to a hit rate of almost 100 % for PSL particles in the size range from 350 to 2000 nm. Regarding cubic NaCl particles the modifications of the ALABAMA result in an up to 2 times increased detection efficiency and an up to 5 times increased hit rate. The need for such instrument modifications arises in particular for measurements of particles that are present in low number concentrations such as ice-nucleating particles (INPs) in general, but also aerosol particles at high altitudes or in pristine environments. Especially for these low particle number concentrations, improved efficiencies help to overcome the statistical limitations of single-particle mass spectrometer measurements. As an example, laboratory INP measurements carried out in this study show that the application of the DIE alone increases the number of INP mass spectra per time unit by a factor of 2 to 3 for the sampled substances. Overall, the combination of instrument modifications presented here resulted in an increased measurement efficiency of the ALABAMA for different particle types and particles shape as well as for highly charged particles.

Highlights

  • Single-particle mass spectrometry (SPMS) is an in situ method to analyze the chemical composition of single aerosol particles

  • It could be concluded that the different hit rates from the dust particle measurement using a neutralizer and delayed ion extraction (DIE) compared to the measurement using only DIE are due to an electric field located outside the electrodes, which has an influence on the flight path of highly charged particles

  • We demonstrated that the performance of the single-particle mass spectrometer Aircraft-based Laser ABlation Aerosol MAss spectrometer (ALABAMA) was significantly improved by using a newly developed aerodynamic lens system, a delayed ion extraction, and better electric shielding

Read more

Summary

Introduction

Single-particle mass spectrometry (SPMS) is an in situ method to analyze the chemical composition of single aerosol particles. The contribution of ice-nucleating particles (INPs) to aerosol–cloud interactions can only be estimated under various assumptions due to their partly unknown chemical composition, different possible freezing processes, and the limited number of suitable aircraft-based measurements (Boucher et al, 2013; Cziczo et al, 2017; Kanji et al, 2017; Heymsfield and Willis, 2014; DeMott et al, 2011; Gettelman et al, 2012). Together with the typically low atmospheric INP number concentration between about 10−6 and 104 stdL−1 (Kanji et al, 2017; Cziczo et al, 2017), the statistical limitation became a decisive problem in these measurements This requires a high measurement efficiency of instruments analyzing the particle chemical composition. The hit rate decreased from typical values by 10 %–20 % (Köllner, 2020; Schneider et al, 2020) to 0 %–2 %

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call