Optimizing process parameters of palm oil bleaching on locally prepared animal bone–based activated carbon using response surface methodology

Abstract

AbstractAdsorptive bleaching potentials of activated animal bone on palm oil was investigated. Palm oil was obtained locally from the mesocarp of oil palm fruits. The obtained palm oil was degummed, neutralized, and subjected to proximate analysis before bleaching. The animal bone–based activated carbon used as a bleaching material was locally prepared by cleaning, drying, carbonization, and chemical activation process. The prepared activated carbon (CBAC) was characterized using Fourier transform infrared, scanning electron microscopy, Braummer–Emmett–Teller, and x‐ray diffraction (XRD) methods. Bleaching of the prepared palm oil on CBAC was done at different process conditions. The characterization results of BET analysis show that CBAC has a surface area of 593.270 m2/g, micropore surface area 595.56 m2/g, micropore volume 0.212 cm3/g, Langmuir surface area 1.38e+04 m2/g, and adsorption energy 3.998 KJ/mol. XRD analysis indicates gypsum as the dominant mineral in the activated carbon sample. The CBAC efficiency of 75.14% was obtained for time/temperature interactions at 50 min/120°C while at 25 g/50 min dosage/time interactions an efficiency of 75.17% was obtained.