Optimized heat transport in Marangoni boundary layer flow of a magneto nanomaterial driven by an exponential interfacial temperature distribution

Abstract

AbstractIn a small boundary layer of the fluid interface, the temperature distribution deviates from being linear with the spatial coordinate and exhibits an exponential form. Hence, the Marangoni convective flow of a nanoliquid driven by an exponential interfacial temperature distribution is modeled in this study. Due to practical applicability, the working fluid is chosen to be ethylene glycol‐based magnesium oxide nanoliquid, which is modeled using experimentally estimated properties. In the system, the external effects of an inclined magnetism, thermal radiation, and an internal heat source are considered. Heat transport is rigorously analyzed using an empirical model, which is estimated using the robust response surface methodology (RSM) to find the optimal working conditions and to estimate the sensitivity. The modeled problem is simulated numerically using the finite difference‐based scheme and a parametric analysis is conducted to study the effect of magnetic field, inclination of magnetic field, radiation, and internal heat source parameters. The internal heat generation (increase of 0.94%) factor dominates the augmentation in the thermal field but at some distance, the thermal radiation factor has a predominant impact (58.99%). The inclination angle of the magnetic field has a prominent decremental impact on the velocity profile. Also, the radiative heat flux enhances the temperature profile. Optimal working conditions are estimated to be with a magnetic inclination of 10° and using a liquid with 0.25% volume fraction of 100 nm. This study finds applicability in crystal growth, drying silicon wafers, and heat exchangers.