Abstract
Soil compaction is a common problem facing conservation fields that restricts crop root growth and causes yield decrease. Subsoil techniques have been developed to break up the compaction layer. However, subsoil implement requires large draft power that hampered the development of subsoil techniques for most of developing countries due to lack of large scale tractors. Aiming to optimize the penetration resistance of the subsoiler and create a good working environment for the operators, a staggered vibrating subsoiler was developed. A new staggered vibrating mechanism was designed to generate the staggered vibration of the shanks meanwhile the V-shape shanks arrangement was adopted to keep relative balance for the subsoiler. In order to obtain optimum working parameters of the vibration frequency and forward speed, the trajectory of shanks was simulated by using the MATLAB software. The forward speed of 2-3 km/h with vibration frequency of 12 Hz was recommended to acquire an effective decrease in draft force. Field performance of this subsoiler was evaluated in terms of the draft force, power requirement and tractor wheel slippage. By comparing the two operation modes, staggered vibrating (SV) and rigid (NV) of shanks, the decrease ratios of draft force for SV were determined by 16.97%, 12.12% and 9.02% at forward speeds of 2.2 km/h, 2.6 km/h and 3.1 km/h, respectively. This is better than the research for the 1SZ-460 vibratory subsoiler that was decreased by 9.09% in draft force. The power requirement for SV was not significantly greater than that for NV. The obviously decreased wheel slippage was observed for SV by decrease of 12.47%, 17.96% and 21.79% at forward speeds of 2.2 km/h, 2.6 km/h and 3.1 km/h, respectively. In conclusion, the staggered vibrating subsoiler presents preferable working performance and is recommended to be applied in subsoil tillage process for developing countries. Keywords: vibrating subsoiler, staggered vibrating mechanism, V-shape arrangement, field experiment DOI: 10.25165/j.ijabe.20191201.4297 Citation: Wang Y X, Osman A N, Zhang D X, Yang L, Cui T, Zhong X J. Optimized design and field experiment of a staggered vibrating subsoiler for conservation tillage. Int J Agric & Biol Eng, 2019; 12(1): 59–65.
Highlights
Tillage is a basic practice in the crop production[1]
The staggered vibrating (SV) operation mode acquired low draft force comparing to NV operation mode at three forward speeds (Figure 8)
That is better than the research for the 1SZ-460 vibratory subsoiler acquiring decrease in draft force by 9.09% being done at the same place with similar condition[23]
Summary
Tillage is a basic practice in the crop production[1]. It is a process of mechanical manipulation of the soil by changing soil physical properties such as soil bulk density, soil moisture content and soil aggregate size. Subsoiling can minimize the effect of drought and lead to an increase in crop yield[13,14] It has been an important issue on subsoil implement to reduce the draft force, especially for developing countries because of the lack of large power tractors[15]. The general purposes of this study is to optimize the penetration resistance and keep the vibration balance for the subsoiler during its work on the field to reduce more draft force and create a good working environment for the operators. The specific objectives are to (1) develop staggered vibrating subsoiler with staggered vibrating mechanism, (2) analysis the trajectory of shanks arranged at V-shape based on MATLAB to obtain the optimum working parameters, (3) evaluate the field performance of the subsoiler in terms of the draft force, power requirement and tractor wheel slippage
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Agricultural and Biological Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
