Optimized DA-reconfigurable FIR filters for software defined radio channelizer applications

Abstract

PurposeIn this paper, the authors present different methods for reconfigurable finite impulse response (RFIR) filter design. Distributed arithmetic (DA)-based reconfigurable FIR filter design is suitable for software-defined radio (SDR) applications. The main contribution of reconfiguration is reuse of registers, multipliers, adders and to optimize various parameters such as area, power dissipation, speed, throughput, latency and hardware utilizations of flip-flops and slices. Therefore, effective design of building blocks will be optimized for RFIR filter with all the above parameters.Design/methodology/approachThe modified, direct form register structure of FIR filter contributes the reuse concept and allows utilization of less number of registers and parallel computation operations. The disadvantage of DA and other conventional methods is delay increases proportionally with filter length. This is due to different partial products generated by adders. The usage of adder and multipliers in DA-FIR filter restricts the area and power dissipation because of their complexity of generation of sum and carry bits. The hardware implementation time of an adder can be reduced by parallel prefix adder (PPA) usage based on Ling equation. PPA uses shift-add multiplication, which is a repetitive process of addition, and this process is known as Bypass Zero feed multiplicand in direct multiplication, and the proposed technique optimizes area-power product efficiently. The modified DA (MDA)-based RFIR filter is designed for 64 taps filter length (N). The design is developed by using Verilog hardware description language and implemented on field-programmable gate array. Also, this design validates SDR channel equalizer.FindingsBoth RFIR and SDR are integrated as single system and implemented on Artix-7 development board of XC7A100tCSG324 and exploited the advantages in area-delay, power-speed products and energy efficiency. The theoretical and practical comparisons have been carried out, and the results are compared with existing DA-RFIR designs in terms of throughput, latency, area-delay, power-speed products and energy efficiency, which are improved by 14.5%, 23%, 6.5%, 34.2% and 21%, respectively.Originality/valueThe DA-based RFIR filter is validated using Chipscope Pro software tool on Artix-7 FPGA in Xilinx ISE design suite and compared constraint parameters with existing state-of-art results. It is also tested the filtering operation by applying the RFIR filter on Audio signals for removal of noisy signals and it is found that 95% of noise signals are filtered effectively.