Abstract
Laser directed energy deposition (DED) offers significant advantages for the integral manufacturing of large-scaled thin-walled workpieces. Nevertheless, how to improve the yield strength (YS) and fatigue properties of thin-walled parts fabricated by DED is a crucial issue. As an advanced surface strengthening technology, ultrasonic surface rolling process (USRP) is aimed to improve the mechanical performances of additively manufactured workpieces. In this work, an optimized bilateral USRP parameter (including the load, repeated times, scanning speed, etc.) with high manufacturing efficiency and surface integrity was developed to fabricate thin-walled CoCrNi medium-entropy alloy (MEA) parts (~1.5mm thickness). Compared to the as-deposited sample, the sample treated by USRP shows a good strength-ductility balance (ultra-high YS and ductility with 1026.6MPa and 21.9%, respectively), as well as an impressive improvement in the high-cycle fatigue limit strength of 76.9%. The reasons for high mechanical performance are revealed through multi-scale characterization and calculation. Ultra-high strength is predominantly attributed to the high-density pre-existing dislocations and deformation twins (DTs); Good ductility is related with high hetero-deformation induced stress and the activation of multiple deformation substructures induced by high flow stress, such as dislocations, DTs and hexagonal close-packed phase. Further, the improvement in fatigue performance is ascribed to the closure of manufacturing defects in the surface or subsurface and inhibited surface roughening behavior from stable gradient nanotwinned layer. Finally, the work reveals the quantitative relationship among processing-properties-promotion mechanism (PPP), which provides a criterion to meet the specific mechanical performance of DEDed thin-walled components by precisely tuning the bilateral USRP parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
