Abstract
ABSTRACTDemineralization study on flotation tailings coal with an objective to minimize the consumption of sodium hydroxide was explored. In the present work, the effect of process parameters such as pulp density (PD) of coal slurry, alkali (NaOH) concentration and reaction temperature on the ash content of product coal and NaOH consumption was investigated. Optimum process conditions were selected based on the minimum loss of NaOH and maximum PD (so that reactor volume required per ton of raw coal treatment can be minimized) along with the desired level of ash reduction. Experimental results shows that the consumption of sodium (Na) per unit ash removal increases with increase in alkali concentration for a given PD and at the same time decreases with increase in PD for a given alkali concentration. Furthermore, it was observed that the amount of Na consumption per unit ash removal is directly proportional to the reaction temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Mineral Processing and Extractive Metallurgy Review
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
