Abstract
The optimal conditions for vanillin production from lignin depolymerization using CuO/Al2O3 catalysts were determined by combining Box-Behnken design (BBD) and response surface methodology (RSM). Independent variables, including temperature (80–140 °C), NaOH loading (0.5–1.5 g), time (30–90 min), and catalyst weight (0.5–1.5 g), were investigated to determine the optimal conditions, with the concentration of vanillin being the dependent variable. A CuO/Al2O3 catalyst was prepared by impregnation method. The vanillin obtained from the reaction was analyzed using high-performance liquid chromatography (HPLC). The maximum obtained vanillin concentration of 59.14 mg·L-1 was achieved with a temperature of 80 °C, a reaction time of 90 min, NaOH loading of 1.5 g, and 1.5 g of catalyst. The amount of NaOH was the most influential factor governing the obtained vanillin concentration. Regression analysis was performed to determine the formula describing the vanillin concentration in terms of the independent variables with a reasonable degree of accuracy (R2 = 0.87). This study shows that the optimal conditions for the depolymerization of lignin to vanillin over a CuO/Al2O3 catalyst can be achieved under milder conditions than those reported previously.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.