Abstract
Abstract The aim of the research described in this article was to optimize the basic sulphur process of lignin removal from the raw radially cut basswood (Tilia Cordata) pieces of various thicknesses. Lignin removal took place chemically in several consecutive steps in which the influence of individual parameters was investigated (solutions of NaOH + Na2SO3, KOH + Na2SO3, its concentrations, time of leaching, efficacy of whitening agents, effect of sample washing between individual baths, etc.). Through experiments, it was found that the change of fresh NaOH + Na2SO3 solution during the experiment had no significant effect. In contrast, skipping the washing of the samples with boiling distilled water after the hydroxide bath had a significant effect on the rate and efficiency of lignin removal with H2O2 in the following step. When comparing the lignin removal efficiency of NaOH + Na2SO3 and KOH + Na2SO3, the delignification process was clearly demonstrated to be more effective using the KOH + Na2SO3 solution. Application of the above-mentioned procedures has helped to streamline the lignin removal process from solid basswood.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Research Papers Faculty of Materials Science and Technology Slovak University of Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
