Optimization of the Pressure Drop Prediction Model of Wellbore Multiphase Flow Based on Simultaneous Perturbation Stochastic Approximation

Abstract

In the process of gas lift design and condition diagnosis, the accuracy and timeliness of wellbore multiphase flow model prediction results are the basis for all subsequent work. However, for the commonly used wellbore multiphase flow pressure drop prediction models, there is a big deviation between the predicted value and the measured one, and the optimization based on the measured data is time-consuming, and it is difficult to obtain the optimal parameters of the model. Therefore, based on the well bore pressure distribution data measured quickly in area R of an oil field in Kazakhstan, a better prediction model of multiphase flow in the well bore was selected at first. Then, the simultaneous perturbation stochastic approximation (SPSA) algorithm was incorporated in the wellbore multiphase flow model to optimize the liquid holdup, which is the leading factor in the model. After repeated single well optimization and greedy selection, the optimal parameters suitable for the whole block were obtained. The example shows that the optimization speed is 10 times faster than that of Particle Swarm Optimization (PSO). After that, the optimized model was used to predict the wellbore pressure distribution, and it was found that the relative error between the measured value and the predicted one was less than 15%.