Year-end Sale % OFF 
Abstract
Abstract To improve the separation performance of the polydimethylsiloxane (PDMS)/bark biochar (BB) nanocomposite membranes used for alcohol/water separation, the preparation conditions of these composite membranes were analyzed and optimized. In this study, we investigated the following preparation parameters: the BB pyrolysis temperature, the weight ratio of the silane coupling agent (KH-550) to bark biochar (BB), and the BB loading amount. The regression equations were established between these three preparation parameters and the final pervaporation (PV) performance characteristics of the composite membranes. The membranes performed the best under the following optimal preparation conditions: a BB pyrolysis temperature of 407°C; a silane coupling reagent/BB weight ratio of 0.86, and a BB loading amount of 3.36 wt%. According to the results of the regression analysis, a maximum permeation flux of 221.2 g·m−2·h−1 and a maximum selective factor of 21.3 was obtained when the feed temperature for the 5 wt% alcohol solution was set at 40°C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
