Abstract

In this study, the steam distillation process of volatile oil from Angelicaesinensis Radix was optimized according to the concept of quality-by-design. A homemade glass volatile oil extractor was used to achieve better cooling of the volatile oil. First, the soaking time, distillation time, and liquid–material ratio were identified as potential critical process parameters by consulting the literature. Then, the three parameters were investigated by single factor experiments. The volatile oil yield increased with the extension in the distillation time, and first increased and then decreased with the increase in soaking time and liquid–material ratio. The results confirmed that soaking time, distillation time, and liquid–material ratio were all critical process parameters. The kinetics models of volatile oil distillation from Angelicaesinensis Radix were established. The diffusion model of spherical particle was found to be the best model and indicated that the major resistance of mass transfer was the diffusion of volatile oil from the inside to the surface of the medicinal herb. Furthermore, the Box–Behnken experimental design was used to study the relationship between the three parameters and volatile oil yield. A second-order polynomial model was established, with R2 exceeding 0.99. The design space of the volatile oil yield was calculated by a probability-based method. In the verification experiments, the average volatile oil yield reached 0.711%. The results showed that the model was accurate and the design space was reliable. In this study, 21 chemical constituents of volatile oil from Angelicaesinensis Radix were identified by gas chromatograph-mass spectrometer(GC-MS), accounting for 99.4% of the total volatile oil. It was found that the content of Z-ligustilide was the highest, accounting for 85.4%.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call