Abstract
Abstract: In the current study, flexural strength of combination of natural and synthetic fiber with particle filled hybrid composites have been studied. The flexural strength of the hybrid composite mainly depends on the proportion of the sisal fiber weight, glass fiber weight and alumina weight. Taguchi technique has been applied to find the optimized parameters of the developed hybrid composites. Results were obtained for the L9 orthogonal combination from experimentation. The results were analysed with the help of Signal/Noise (S/N) Ratio, Main effect plot and Analysis of variance (ANOVA) using Mini Tab 19. Regression equation are developed for all three reinforcements separately. From the current study it was observed that the flexural strength of the hybrid composite mainly depends on the sisal fiber precent that the other two reinforcements. Based on the experimental observations the maximum ultimate flexural strength was found to be 145.97 MPa for optimised input parameters as 20% of sisal fiber, 20% of glass fiber and 2% of alumina. Keywords: Taguchi technique, ANOVA, Flexural strength, Sisal fiber, Glass Fiber, Alumina
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal for Research in Applied Science and Engineering Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
