Optimization of seismic performance in waste fibre reinforced concrete by TOPSIS method

Abstract

For a sustainable environment and to tackle the pollution problem, industrial wastes can be used in concrete composite materials. This is especially beneficial in places prone to earth quack and lower temperature. In this study, five different types of waste fibres such as polyester waste, rubber waste, rock wool waste, glass fibre waste and coconut fibre waste were used as an additive in 0.5% 1%, and 1.5% by mass in concrete mix. Seismic performance related properties of the samples were examined through evaluation of compressive strength, flexural strength, impact strength, split tensile strength, and thermal conductivity. Results showed that, impact strength of the concrete significantly improved by the addition of fibre reinforcement in concrete. Split tensile strength and flexural strength were significantly reduced. Thermal conductivity was also influenced by addition of polymeric fibrous waste. Microscopic analysis was performed to examine the fractured surfaces. In order to get the optimum mix ratio, multi response optimization technique was used to determine the desired level of impact strength at an acceptable level of other properties. Rubber waste was found to be the most attractive option followed by coconut fibre waste for the seismic application of concrete. The significance and percentage contribution of each factor was obtained by Analysis of variance ANOVA (α = 0.05) and pie chart which showed that Factor A (waste fibre type) is the main contributor. Confirmatory test was done on optimized waste material and their percentage. The order preference similarity to ideal solution (TOPSIS) technique was used for developed samples to obtain solution (sample) which is closest to ideal as per given weightage and preference for the decision making. The confirmatory test gives satisfactory results with error of 6.68%. Cost of reference sample and waste rubber reinforced concrete sample was estimated, which showed that 8% higher volume was achieved with waste fibre reinforced concrete at approximately same cost as pure concrete. Concrete reinforced with recycled fibre content is potentially beneficial in terms of minimizing resource depletion and waste. The addition of polymeric fibre waste in concrete composite not only improves seismic performance related properties but also reduces the environmental pollution from waste material which has no other end use.