Optimization of Rubber Wood Drying by Response Surface Method and Multiple Contour Plots

Abstract

By adopting the central-composite experiment design, the response surface methodology was used to optimize operating conditions of rubber wood drying. The independent variables are initial moisture content of rubber wood, and three drying environment parameters namely, temperature, relative humidity, and air velocity. The investigating responses are final moisture content, drying time, and energy consumption. The restriction of the optimization is the designated final moisture content, which is not greater than 16%. The third-order polynomial models with transformed responses were developed from experiment data to generate 3-D response surfaces and contour plots. The analysis of variance (ANOVA) was performed to identify the significant parameters affecting the rubber wood drying. Drying temperature and holding relative humidity are those two influential operating parameters that significantly control the final moisture of rubber wood and affect the drying time and energy. The multiple contour plots of drying responses show that the optimum operating regions are located mainly at high temperature drying zone. The high temperature drying practice can save energy and drying time by 44 and 25% respectively, in comparison to the conventional temperature drying.