Abstract
AbstractThe biosorption of nickel(II) by dried cells of Bacillus cereus, isolated from the sediment from an SBR reactor, was studied by response surface methodology (RSM). In this study, RSM based on central composite rotatable design was used to analyze the combined and individual effects of operating parameters (biomass dose,initial concentration of nickel(II), and pH) on the nickel adsorption capacity by dried B. cereus at an ambient temperature. A quadratic polynomial equation was obtained which could predict the amount of adsorbed nickel(II) by dried B. cereus. The analysis of variance showed that the effects of pH and biomass dose both had a significant influence on the removal of nickel(II), but the effect of pH was the most significant. The maximum adsorption amount of nickel(II) was found at a pH of 4, biomass concentration of 2.0 g L−1, and initial nickel(II) ion concentration of 150 mg L−1. Under this condition, the maximum adsorption amount of nickel(II) and the maximum adsorption rate were 20...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.