Optimization of Pineapple Leaf Fibre Extraction Methods and Their Biodegradabilities for Soil Cover Application

Abstract

Cellulosic natural fibres from pineapple leaves are considered as a green alternative to the conventional polyethylene (PE) soil cover in agro-industry. The use of pineapple leaf fibres (PALFs) soil cover can overcome the disposal problem of the conventional plastic covers which take hundreds of years to degrade. This research was undertaken to study the effectiveness methods of extracting the PALFs. The mechanical method utilized ‘roller and bladder system’, where the chemical method involved the extraction with 6% NaOH, 20% aqueous acetone, and pineapple juice solution. The semi-mechanical method was a combination of “roller and bladder” system and a chemical retting process using 6% NaOH alkaline solutions. The characteristics of the extracted fibers were determined using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Kappa number test of the fibres extracted with semi-mechanical method showed the lowest percentage of lignin (3.39%). Based on XRD results, the highest percentage of crystallinity was recorded when PALF was extracted using the semi-mechanical method. A remarkable change on the morphological surface the biodegraded PALF soil cover was observed after 90 days of soil burial test. Biodegradability of soil cover made from PALF was higher than the commercial degradable soil cover i.e. PE/starch (80 wt% PE/ 20 wt% starch). Meanwhile, the growing rate and the soil fertility of chili tree that used PALFs soil cover showed better results than the chili tree that used conventional PE/starch soil cover.