Abstract
Titanium (IV) oxide-flamboyant seeds activated carbon (TiO2-FSAC) composite was studied as a promising adsorbent for p-nitroaniline (p-NA) removal from aqueous media using batch technique. The surface characteristics of the composite were determined by Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, Energy Dispersed X-ray Spectroscopy and Brunauer–Emmett–Teller surface area analysis. The results showed that TiO2-FSAC is highly porous with a surface area of 601.77 m2/g and pore diameter in the mesoporous region. Box-Behnken design (BBD) under Response Surface Methodology (RSM) was employed for the optimization of four operating parameters: initial p-NA concentration, pH, adsorbent dosage and time. The results revealed that the amount of p-NA adsorbed increased with an increase in initial p-NA concentration, low pH, and low adsorbent dosage and was not affected by time in the investigated range. The correlation between p-NA adsorption by TiO2-FSAC and the process variables was sufficiently established by the quadratic model with a high R2 value (0.973), which is in agreement with adjusted R2 (0.945). The optimum amount of p-NA adsorbed was 45.0 mg/g accomplished at Co = 300 mg/L, pH 2, 0.1 g adsorbent dosage and 362.5 min time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.