Abstract
The pretreatment of oil palm frond (OPF) has been carried out using 1-butyl-3-methylimidazolium bromide ([BMIM]Br) in the presence of aqueous sulphuric acid (H2SO4). The effects of reaction temperature, reaction time and [BMIM]Br loading on lignin degradation were investigated by applying Box Behnken Design of Response Surface Methodology (RSM). The optimized process condition for OPF pretreatment were 123°C, 175 min and 9.9 g of [BMIM]Br loading with an optimum lignin degradation of 88.2%. The experimental results fitted-well with the predicted value with less than 5% error. It was also demonstrated that lignin degradation using recycled [BMIM]Br gave sufficient performance for five successive runs. It was revealed from SEM and XRD analyses, that the pretreated OPF was porous and less crystalline after pretreatment. Consequently, the pretreated OPF renders 25.3% levulinic acid yield in acid hydrolysis compared to 18.2% yield for untreated OPF.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
