Abstract
An experimental investigation of a nonreacting multiple jet mixing with a confined crossflow has been conducted. Flow and geometric conditions were varied in order to examine favorable parameters for mixing. The requirement for a rapid and intense mixing process originates from combustion applications, especially the RQL-combustion concept. Thus, the jets were perpendicularly injected out of one opposed row of circular orifices into a heated crossflow in a rectangular duct. Spacing and hole size were varied within the ranges referring to combustor applications. The results presented are restricted to an in-line orientation of opposed jet axis. Temperature distribution, mixing rate, and standard deviation were determined at discrete downstream locations. Best, i.e., uniform mixing can be observed strongly depending on momentum flux ratio. For all geometries investigated, an optimum momentum flux ratio yields to a homogeneous temperature distribution in the flow field downstream of the injection plane. Overly high ratios deteriorate the mixing process due to the mutual impact of the opposed entraining jets along with a thermal stratification of the flowfield. Correlations are introduced describing the dependency of optimum momentum flux ratio on mixing hole geometry. They allow the optimization of jet-in-crossflow mixing processes in respect to uniform mixing.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
