Abstract
The commercial activated carbon (AC) with enhanced adsorption performance capacity was studied via green functionalization. The adsorption of methylene blue (MB) from aqueous solution by deionized‑water functionalized activated carbon (DFAC) was investigated in a laboratory‑scale batch mode. The interaction effects of different operating parameters; adsorbent dosage (1‑5 g/L), pH (2-12) and agitation speed (100‑200 rpm) were studied. The ANOVA results suggested the quadratic model and the analyzed model were well fitted. The higher correlation coefficient, R2 value of 0.93 and low p-value (0.0002) indicating the fitness of the response surface quadratic model developed. The optimum conditions were found to be the adsorbent dosage of 4.7 g/L, pH of 12 and agitation speed of 150 rpm, in which 99.74% of MB removal was achieved. Additionally, the confirmatory experiment was conducted to evaluate the accuracy of the optimized conditions in which the range of deviation is was 4.07%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
