Abstract
This paper presents simulation results for double nanohole and inverted bowtie nanoapertures optimized to resonate in the short-wave infrared regime (1050 nm and 1550 nm). These geometries have shown great promise for trapping nanoparticles with applications in optical engineering, physics, and biology. Using a finite element analysis tool, we found that the outline length for inverted bowtie nanoapertures in a 100 nm thick gold film with a 20 nm gap dimension having an optimized transmission resonance for 1050 nm and 1550 nm optical wavelengths is 106.5 nm and 188.5 nm, respectively. With the same gap size, the radii of the circles for the double nanohole nanoapertures are 72 nm and 128 nm. The near-field enhancements of the two structures are almost the same, while the double nanohole geometries have a 20% larger full width at half-maximum than the inverted bowtie. Next, by studying the effect of changing the inner radii of the inverted bowtie corners, we found that the difference between 2 nm and 6 nm corner radii can blue-shift the optical resonance by up to 45 nm. As a result of not having any inner corners, the double nanohole structure requires less precise fabrication and therefore could potentially have a higher successful yield of nanoapertures during the manufacturing process. Lastly, we will show experimental results that confirm the optical resonance of the nanoapertures at 1550 nm. These results will enable better performance and signal-to-noise ratio in nanoaperture trapping for the short-wave infrared wavelength regime.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have