Abstract
Pervaporation (PV) is characterised by good hydrophilicity and antifouling properties. However, it is still unavoidable to need cleaning during long-term operation. Sodium hypochlorite (NaClO) is a commonly used purifying agent for organic pollutants, but it may cause damage to the polymer membrane. In this study, a grafting method was proposed to enhance the chlorine resistance and water permeability of membrane composite polyvinyl alcohol (PVA) pervaporation membrane. Modified PVA (SPVA) was prepared by grafting 5-sulfosalicylic acid (SSA) to improve the hydrophilicity of the membrane using the sulfonic acid group on SSA. SPVA-FA/PTFE composite membranes were prepared by using perfluoroglutaric acid (PFGA) as crosslinking agent to improve the chlorine resistance of the membranes by utilising the C-F chain contained therein. The water flux was 120.38 ± 1.72 kg/(m2·h), which was 84.2 % higher than that before grafting, when tested at 70 °C and 3.5 wt% NaCl. The chlorine resistance of SPVA-PFGA/PTFE composite membrane was tested in 2000 ppm (pH = 12) NaClO solution for 480 h, and the salt rejection remained above 99.93 %. When desalinating 20 wt% NaCl at 70 °C, the water flux of SPVA-PFGA/PTFE membrane is 51.95 ± 0.6 kg/(m2·h), which has the potential to treat high concentration brine.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
