Abstract

Optimization of magnetic coupling mechanism is an important way to improve the performance of a dynamic wireless power transfer system. Inspired by the common radial magnetic core for circular coils, a new radial magnetic core for rectangular coils is adopt. Through simulation and experimental results comparison, which has higher coupling coefficient with the same core area. Combined with the magnetic circuit analysis, the magnetic flux leakage and conduction regions are divided into magnetic fluxes with different shapes, which magnetic resistances are calculated respectively. Based on the simulation results, parameter distributions of fluxes under different conditions are obtained. Therefore, the expressions of the coupling coefficient k of the adopt magnetic cores and coils and the design parameters of coils and cores are obtained. Taking the maximum k and the minimum rate of change of coupling coefficient with 100 mm displacement as the optimization objectives, a multi-objective optimization solution is carried out by using NSGA-II algorithm. The coil optimization scheme is obtained and verified by experiments. k and Δk are 0.442 and 6.8% respectively, and the errors are less than 5%. In the optimization process, there is no simulation model constructed. The optimization modeling combined of magnetic field segmentation method and parameter fitting has lower complexity and calculation time of optimization.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.