Optimization of machining parameters in the abrasive waterjet turning of alumina ceramic based on the response surface methodology

Abstract

A study on the radial-mode abrasive waterjet turning (AWJT) of 96 % alumina ceramic is presented and discussed. An experimental investigation is carried out to explore the influence of process parameters (including water pressure, jet feed speed, abrasive mass flow rate, surface speed, and nozzle tilted angle) on the material removal rate (MRR) when turning 96 % alumina ceramic. The experiments are conducted on the basis of response surface methodology (RSM) and sequential approach using face-centered central composite design. The quadratic model of RSM associated with the sequential approximation optimization (SAO) method is used to find optimum values of process parameters in terms of surface roughness and MRR. The results show that the MRR is influenced principally by the water pressure P and the next is abrasive mass flow rate ma. The optimization results show that the MRR can be improved without increasing the surface roughness when machining 96 % alumina ceramic in the radial-mode abrasive waterjet turning process.