Optimization of juice production from “cempedak” (Artocarpus integer) fruit pulp liquefied with the aid of enzymes

Abstract

PurposeThe purpose of this research is to produce “cempedak” juice using enzyme aided-liquefaction by examining the effects of enzyme types (Pectinex® Ultra SP-L, Celluclast® 1.5 L and Fungamyl® 800 L), enzyme concentrations (0–1.5% v/w), incubation time (0–2.5 h) and incubation temperature (35–60 °C) on juice yield and viscosity, total soluble solids and color of fruit puree.Design/methodology/approachRipe “cempedak” pulp from CH28 fruit was first pureed in a blender and then homogenized with water at 1:2 ratio. The diluted puree was then liquefied with the enzymes separately to reduce its viscosity. Analyses such as juice yield, viscosity, total soluble solids and color of the liquefied “cempedak” puree were then carried out.FindingsResults indicated that the optimized use of 1.2% (v/w) Celluclast® 1.5 L (Novozymes, Denmark), a cellulase preparation, at 45 °C and 1 h produced juice with the lowest viscosity (349.4 cP) and the highest juice yield (82.3% v/w). Liquefied “cempedak” juice was darker (with L* value of 51.17) and more yellowish (b* value of 38.88) compared to “cempedak” juice without liquefaction (control). When compared to untreated “cempedak” juice, the droplet size of “cempedak” juice obtained after liquefaction under optimized conditions was found to be lower, regardless of whether the juice was filtered (with a total reduction of 23% of droplet size) or not filtered (with a total reduction of 16% of droplet size). The results indicate the possibility of employing Celluclast® 1.5 L to produce “cempedak” juice that can be further processed such as for the production of “cempedak” fruit powder.Originality/valueThis paper provides information on the enzyme concentration, incubation time and temperature for liquefying “cempedak” pulp such that the liquefied material produced can be used as a base feed for spray-drying to produce “cempedak” fruit powder.