Optimization of inclined coal seam tunnel section angle and anchor angle based on response surface method

Abstract

The mining of inclined coal seams is often accompanied by problems such as difficult to control deformation of the tunnel roof and failure of anchor bolts. Taking the transportation channel of Jinping Coal Industry 1071-1 in Shanxi Xiangkuang Mine as the background, FLAC3D numerical simulation software was used, and the method of response surface experimental design and data analysis was used to systematically study the effects of the anchor installation angle and the roof inclination angle of the tunnel section on different inclination angles. Influence of the surrounding rock stability of coal seam roadways. On this basis, a multi-index tunnel support design evaluation method based on the response surface method was proposed, and the actual support plan was optimized and industrial tests were carried out based on the actual on-site support plan. The research results show that: in terms of inclined coal seam support, the degree of influence on the tunnel stability is in the following order: anchor installation angle > tunnel section roof inclination angle > coal seam inclination angle; the optimized support design obtained through the proposed technology The method has good application effect and can improve the stability of the roadway during the mining of the working face. It also proves the effectiveness of this technology and provides new ideas for the design of anchor support of inclined coal seam roadways and the optimization of roadway sections.