Abstract
A B S T R A C T A R T I C L E I N F O This paper outlines the Taguchi optimization methodology, which is applied to optimize cutting parameters in high-pressure jet assisted turning when machining Inconel 718. Turning parameters evaluated are the diameter of the nozzle Dn, the pressure of the jet P, the cutting speed Vc, the feed rate f and the distance between the impact point of the jet and the cutting edge d. The experiments were conducted by using L27 (3 13 ) orthogonal array as suggested by Taguchi. Signal-to-Noise (S/N) ratio and Analysis of Variance (ANOVA) are employed to analyze the effect of high-pressure jet assisted turning parameters on the main cutting force and surface roughness, in other words to find optimal levels of the process parameters. The study shows that the Taguchi method is suitable to solve the stated problem with minimum number of trials.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Advances in Production Engineering & Management
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
