Abstract
Welding process affect to the reducing tensile strength value in the weld joint. Improvement to weld joint performance is still studied such as friction welding. This study discussed optimization from welding parameters with Response Surface Method and Taguchi. Based on ANOVA results, that RSM and Taguchi method could be used to optimize the welding parameter. Welding parameter of friction welding could join SS304 with the highest tensile strength 766 pascal. Weld join optimize was 766.5 Pascal when welded with 920 rpm of rotation speed, 9 mm for diameter, and joining time was 2 sec. RSM recommended optimize could be achieved when tensile strength was 624 pascal, rotation speed was 556 rpm, joining time was 0.45 sec, and diameter of specimen 9 mm. Taguchi method could optimize when rotation speed 1466 rpm, diameter specimen 9 mm, and joining time 0.32 sec.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
