Abstract
ABSTRACT In the present work, the surface of the ZK60 Mg alloy was alloyed with tin (Sn), and the FSP process parameters have been optimized for the better mechanical properties by employing response surface methodology (RSM). Furthermore, RSM was combined with artificial neural networks (ANNs) to evaluate and compare the predictive capacity of both the models. FSP process parameters, namely, tool rotational speed (S), feed rate (F), number of passes (N), and weight percentage of Sn (W) were selected as influential parameters for optimization. The optimum conditions that were predicted by the RSM model to maximize the ultimate tensile strength (UTS) and % elongation (%EL) were a tool rotational speed of 2000 rpm, a feed rate of 0.39 mm/sec, 3 number of passes, and 8 wt.% of Sn which yields the maximum tensile strength of 217 MPa and the maximum %El of 26%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
