Optimization of dye extraction from Cordyline fruticosa via response surface methodology to produce a natural sensitizer for dye-sensitized solar cells

Abstract

In the present work, the application of response surface methodology (RSM) for the optimization of process parameters in the chlorophyll extraction from Cordyline fruticosa leaves was performed. The absorbance of the extract obtained from the extraction process under different conditions was estimated using the D-optimal design in RSM. Three different process parameters such as the nature of organic solvent based on their boiling point (ethanol, methanol, and acetonitrile), pH (4–8) and extraction temperature (50–90°C) were optimized for chlorophyll extraction. The effects of these parameters on the absorbance or concentration of the extract were evaluated using ANOVA results of quadratic polynomial regression. The results showed a high R2 and adjusted R2 correlation coefficients of 0.9963 and 0.9921 respectively. Moreover, the analysis of the final quadric model based on the design experiments indicated an optimal extraction condition of pH of 7.99, extraction temperature of 78.33°C, and a solvent boiling point, 78°C. The predicted absorbance was 1.006, which is in good agreement with the experimentally obtained result of 1.04 at 665nm wavelength. The application of pigment obtained under the optimal condition was further evaluated as a sensitizer for the dye sensitized solar cells. Maximum solar conversion efficiency (η) of 0.5% was achieved for the C. fruticosa leaf extract obtained under the optimum extraction conditions. Furthermore, the exposure of the leaf pigment to 100mW/cm2 simulated sunlight yielded a short circuit photocurrent density (Isc) of 1.3mA, open circuit voltage (Voc) of 616mV, and a fill factor (ff) of 60.16%.