Optimization of dimensional accuracy and surface roughness in m-SLA using response surface methodology

Abstract

PurposeThis paper aims to investigate the dimensional accuracy and surface roughness of printed masked stereolithography (m-SLA) parts. The fabricated specimens of photosensitive polymer resin have complex shapes and various features. The influence of four process parameters of m-SLA, including layer height, exposure time, light-off delay and print orientation, is studied on response characteristics.Design/methodology/approachThe Box–Behnken design of response surface methodology is used to examine the effect of process parameters on the shrinkage of various geometrical dimensions like diameter, length, width, and height of different features in a complex shape. Additionally, a multi-response optimization has been carried out using the desirability function to minimize the surface roughness and printing time and maximize the dimensional accuracy.FindingsThe layer height and print orientation influence the surface roughness of parts. An increase in layer height results in increased surface roughness, and the orientation parallel to the z-axis of the machine gives the highest surface roughness. The dimensional accuracy of m-SLA parts is influenced by layer height, exposure time, and print orientation. Although not significant in dimensional accuracy and surface roughness, the light-off delay can affect printing time apart from other parameters like layer height and print orientation.Originality/valueThe effect of layer height and print orientation on dimensional accuracy, printing time, and surface roughness is investigated by researchers using simple shapes in other vat photopolymerization techniques. The present work is focused on studying the effect of these parameters and additional parameters like light-off delay in complicated geometrical parts in m-SLA.