Optimization of cutting power and power efficiency during particleboard helical milling

Abstract

AbstractWith the aim of providing scientific guidance for the application of spiral cutters in particleboard machining, this work studied the influence of milling parameters on milling power and power efficiency during helical milling of particleboard. And the response surface methodology was applied to optimize the milling parameters to reduce machining energy consumption and improve energy efficiency. The factors of milling depth, spindle speed and helical angle were selected as input parameters, and the mathematical models between the input parameters and the response parameters were established. Then, the significant influence of each factor and the interaction of two factors were determined by variance analysis, and the change trend of milling power and power efficiency was studied by response surface methodology. Results showed that the milling depth had the greatest impact on milling power and power efficiency, followed by the spindle speed and helical angle. An increase in the milling depth and spindle speed resulted in an increase in milling power and power efficiency, while the increased helical angle resulted in a decrease in milling power and power efficiency. The optimized values of helical angle, spindle speed and milling depth were 54°, 5650 min−1 and 1.3 mm, respectively.