Abstract
This study aimed to analyze the feed force, cutting force, and surface roughness deviations through CNC lathe turning operation of AM series magnesium alloy. Machining operations were performed using Tungsten Carbide insert with nose radius of 0.8 mm and by varying the basic cutting parameters like feed, cutting speed, and depth of cut. Throughout the experiments, the geometry of the tool was not changed and the cutting fluids are not used in turning operation. The investigation is performed only on the tungsten carbide inserts, and these were changed continuously to prevent the tool wear. The experiments are carried out as per Taguchi’s L27 orthogonal array for cutting force, feed force, and surface roughness under dry cutting conditions. The results prove that the depth of cut and feed mainly influences the Cutting force and feed force. For Surface roughness, the feed and depth of cut are perceived as the influencing controlling factors. Finally, the optimum results are verified by the experimentation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
