Year-end Sale % OFF 
Abstract
The power peaking factor (PPF) is an important parameter that needs to be considered to maintain the reactor's stability, safety and efficiency. The present study discusses the power density distribution in the reactor core by calculating the PPF to increase the reactor safety margin and minimize the possibility of a high power density at a certain point causing core failure in the Molten Salt Reactor (MSR), which is one of the Generation-IV reactors with fuel and coolant dissolved in molten salt. Important parameters discussed in the present study are the distribution of the reactor core region and the fuel composition in each region during the reactor operation time of 2,000 days. Analysis was performed for 3 different thermal power: 150, 450 and 1,000 MWth as a representative to determine the behavior of PPF at small to large power by taking the reference design of the FUJI U3 reactor developed by ITMSF (International Thorium Molten-Salt Forum) Japan. FliBe (Lithium and Beryllium Fluoride) is used as the coolant, and the fuel mixture is 233UF4-ThF4. The calculation was conducted using SRAC2006 with PIJ and CITATION modules that solve the neutron diffusion equation providing power distribution values and effective multiplication factors. As a result, the MSR with 4 core regions produces a more balanced power distribution, a better PPF value, and a good effective multiplication factor for 2,000 days of operation time compared to the reference design. HIGHLIGHTS The research emphasizes the analysis of thermal power levels of 150, 450, and 1000 MWth to understand the Power Peaking Factor (PPF) behavior at different power levels An even power distribution is accomplished by optimizing the number of core regions with different fuel fractions After optimization, the decrease in Power Peaking Factor (PPF) values indicates an improvement in maintaining reactor stability, safety, and efficiency GRAPHICAL ABSTRACT
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
