Abstract
This paper presents an investigation into the applicability of the dynamic approach of the Taguchi method to optimize alkali-activated mortar utilizing ground granulated blast-furnace slag and natural pozzolan from Germany called trass (hereafter, AAGT). The volume ratio of powder to alkaline activating solution (Vp/Vaas) was chosen as an input signal, while flow value and flexural and compressive strengths were considered as output values. The concentration of sodium hydroxide solution, mass ratio of sodium silicate to sodium hydroxide solution, ground granulated blast-furnace slag replacement ratio, mixing regime, mixing time, curing temperature, and cumulative temperature in heat curing were taken into account as design parameters. Based on the experiments conducted using an L18 orthogonal array and the calculated results of signal to noise (SN) ratios and sensitivities, input–output relationships between Vp/Vaas and the output values were optimized. Long-term tests on the optimized specimens revealed the applicability of AAGT as a construction material; however, expansion cracks due to a gypsum formation were noticed after long-term immersion in a 10% sulfuric acid solution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
