Abstract
Reduction of fuel consumption in power plants is an important issue due to their high rate of fuel usage. In the present article, this was done by optimizing rotary regenerator which have a great role in recovering thermal energy in power stations. Heat transfer and pressure drop through 13 popular flow passages of power plant's rotary regenerators were obtained by CFD simulations. The outcomes were used in a mathematical model of the rotary air heater by considering air leakages. The model was capable of distinguishing between different heating surfaces. Then it was used for optimizing a regenerator by genetic algorithm. Rotational speed and dimensions of all three layers (hot end, intermediate layer, and cold end) were optimized to achieve the highest fuel saving. These dimensions were: hydraulic diameters, heating profile type, and length of each layer. Results showed that redesigning these parameters to the optimal values leads to saving of 443 kg of natural gas per hour for one regenerator. A 10 meter regenerator also had the highest reduction in fuel consumption (660 kg/hr). Finally, the influence of air and hot gas temperatures, and air mass flow rate on fuel saving and optimum values of design parameters was discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.